VRRM=50V~1000V, IF=1A~16A, generally used in bridge rectifier and VCC Rectifier applications.
VRRM=50V~1000V, IF=1A~16A, TRR=150ns~500ns, generally used in application lines such as Snubber line/VCC rectification.
The information is being sorted out. Thank you for your trust in Hornby Electronic...
VRRM=50V~600V, IF=1A~30A, TRR=35ns~50ns, generally used for secondary rectification and PFC rectification.
VRRM=20V~200V, IF=1A~40A, used as high frequency, low voltage, high current rectifier diode, freewheeling diode, protection diode, also used as rectifier diode and small signal detection diode in microwave communication circuits. It is more common in communication power supplies, inverters, etc.
VRRM=1000~5000V, high-voltage diode, a silicon crystal diode that is only turned on under high voltage, and is generally used in series with a large capacitor.
Switching diodes are diodes specially designed and fabricated for "on" and "off" on circuits. They are mainly used in electronic computers, pulse and switching circuits.
Often used to trigger bidirectional thyristors, and can also constitute circuits such as overvoltage protection
Zener diodes, also known as Zener diodes. By using the reverse breakdown state of the PN junction, the current can be varied over a wide range and the voltage is substantially constant, and the diode that acts as a voltage regulator is fabricated. Mainly used as a voltage regulator or voltage reference component.